Comprehensive Services for a Groundbreaking Design-Build Project
CoolSys made a noteworthy contribution to the rapidly growing field of sustainable buildings and natural refrigeration with a unique design build refrigeration and controls project that utilizes one of the largest transcritical CO2 installations in U.S. history. The experts at CoolSys provided full building MEP and Refrigeration engineering design, handled energy management system design and installation, procured equipment, installed refrigeration systems, and managed the refrigeration and control/EMS process for a new, 325,000 square foot, first-of-its-kind facility for processing, cooking, freezing, and shipping high-quality meal kits.
Located in Goodyear, Arizona, the facility is not only notable for its massive CO2 refrigeration system but also for housing one of the largest industrial kitchens in North America. The project was a highly complex undertaking, with about half of the square footage consisting of refrigerated storage space and the other half a sophisticated food preparation area.
Project Challenge: Going Sub-Zero in the Desert
One of the greatest challenges CoolSys faced in both the design and implementation for the facility was its location. Until recently, it was considered folly to attempt a transcritical CO2 refrigeration system capable of reaching -10 ̊ F—and particularly one the size of this project—in the unhospitable climate of the Arizona desert, where summertime temperatures can reach 120 ̊ or more. It was widely believed to be impossible to create an energy-efficient transcritical CO2 system in such a hot climate. Those assumptions, however, have been proven wrong.
In contrast to the extreme summer heat, winter temperatures in the Arizona desert can drop to near freezing, requiring equipment that can handle outside temperature variations of 80 ̊ or more
CoolSys Solution: A Refrigeration System That Beats the Heat
To keep 18 rooms comprising approximately 160,000 square feet of refrigerated space in the massive facility at the required temperatures, CoolSys procured and installed four transcritical CO2 rack systems, totaling over 16,000 MBH of compressor capacity, in the building’s machine room.
Each of the four racks utilizes a rooftop adiabatic gas cooler to reject heat. In total, the system supplies refrigeration for 78 evaporator coils in the refrigerated sections of the building. CoolSys recommended adiabatic gas coolers for this project to enable efficient refrigeration performance in the desert. Adiabatic systems also use much less water—a precious resource in the harsh Arizona climate—than more conventional evaporative condensers.
The team also installed two adiabatic fluid coolers on the roof that provided condenser water to condensing units for eight blast chillers in the food preparation area of the facility. Inside the building, CoolSys installed 78 evaporator coils that supply refrigeration for about half of the 352,000-square-foot facility.
In addition to the rooftop systems and evaporator coils, CoolSys installed dedicated, packaged CO2 condensing units and associated piping for two food processing spiral chillers, as well as stainless steel piping, a building control system—including complete refrigeration system energy management—and leak detection in each refrigerated space.
CoolSys Solution: A Refrigeration System That Beats the Heat
In order to keep 18 rooms comprising approximately 160,000 square feet of refrigerated space in the massive facility at the required temperatures, CoolSys procured and installed four transcritical CO2 rack systems, totaling over 16,000 MBH of compressor capacity, in the building’s machine room. Each of the four racks utilizes a rooftop adiabatic gas cooler to reject heat. In total, the system supplies refrigeration for 78 evaporator coils in the refrigerated sections of the building. (The four gas coolers are pictured above.) CoolSys recommended adiabatic gas coolers for this project to enable efficient refrigeration performance in the desert. Adiabatic systems also use much less water—a precious resource in the harsh Arizona climate—than more conventional evaporative condensers.
The team also installed two adiabatic fluid coolers on the roof (one of which is in the photo above, left) that provided condenser water to condensing units for eight blast chillers in the food preparation area of the facility. The pump skids that circulate water to each condensing unit are in the foreground of the photo above, left, and in the photo above, right.
Inside the building, CoolSys installed 78 evaporator coils that supply refrigeration for about half of the 352,000-square-foot facility. (Pictured above, the team rigs one of the units.)
In addition to the rooftop systems and evaporator coils, CoolSys installed dedicated, packaged CO2 condensing units and associated piping for two food processing spiral chillers, as well as stainless steel piping, a building control system—including complete refrigeration system energy management—and leak detection in each refrigerated space.
325,000
Total Square Footage
160,000
Refrigerated Square Footage
40
Packaged HVAC Units
78
Evaporator Coils
325,000
Total Square Footage
160,000
Refrigerated Square Footage
40
Packaged HVAC Units
78
Evaporator Coils
Project Challenge: Balancing Quality and Economic Considerations
Due to ongoing worldwide economic and supply-chain challenges—as well as the size and scope of the project—the customer was, understandably, conscious of staying on budget while maintaining its high standards for quality and safety.
Project Solution: Flexible Options
CoolSys worked closely with the client’s project managers to understand and meet its needs for equipment, budget and so forth. As with all of its customers, CoolSys sourced equipment from a wide variety of highly regarded manufacturers to get the best-performing components for each job at a price that fit within the client’s budget. The result was a project that came in on-spec and on-time. In addition, value engineering activities during the design phase of the project resulted in $1 million in savings compared with the original design.
Project Solution: Flexible Options
CoolSys worked closely with the client’s project managers to understand and meet its needs for equipment, budget and so forth. As with all of its customers, CoolSys sourced equipment from a wide variety of highly regarded manufacturers to get the best-performing components for each job at a price that fit within the client’s budget. The result was a project that came in on-spec and on-time. In addition, value engineering activities during the design phase of the project resulted in $1 million in savings compared with the original design.
5
3,000A, 480/227V Electrical Services
16,000 MBH
Compressor Capacity
$1,000,000
Capital Cost Avoidance Secured
4
Transcritical CO2 Sytems
5
3,000A, 480/227V Electrical Services
160,000 MBH
Compressor Capacity
$1,000,000
Capital Cost Avoidance Secured
4
Transcritical CO2 Systems
Flexible and Scalable Design-Build Services
CoolSys is known nationwide for its broad range of design-build services for a wide variety of client needs, from the massive, single-site build-out in Arizona to coordinated, simultaneous work in hundreds of sites across the county and everything in between. The company offers end-to-end design-build for refrigeration projects, professional project management (with or without equipment purchasing) and national refrigeration programs—including refrigeration conversions.
Unlike most of its competitors, CoolSys has its own engineering division, CoolSys Energy Design (CED) and its own energy optimization division, CoolSys Energy Solutions (CES). The team offers standalone services and also works in tandem with other CoolSys divisions on engineering and design-build projects. In addition, CoolSys is recognized nationwide as a leader in transcritical CO2 technology in the U.S., with more than 500 of its technicians trained in CO2 technology and more than 250 CO2 projects completed around the country.
Request a Quote or Learn More
To learn more about CO2 systems or to request a consultation, we invite you to complete the form below.